AQUAMATIC HP offers an alternative watering solution that
can reduce watering problems and expenses. Compare and you
will see that the AQUAMATIC HP sets the standard for performance,
safety and value.
PERFORMANCE
Electrolyte level indicator – Each
plug shows the actual level of electrolyte in the cell.
One quick look can confirm that your system is working properly.
Specific gravity measuring – To
measure specific gravity; simply open the flip-top lid and
insert the hydrometer through the opening.
Lever-operated positive shutoff valve
– As the electrolyte level in the cell rises, the
float on the AQHP valve uses a strong mechanical advantage
to push the valve mechanism toward the closed position.
The water attempting to enter the valve also pushes the
mechanism toward the closed position, providing positive
shutoff – no leakage, no overfilling.
Wide filling pressure range – AQUAMATIC
HP accommodates water pressures that range from 3 psi, which
makes it compatible with gravity-feed, direct-fill and pressurized
delivery systems.
 |
SAFETY
Double chamber – Water goes down one
chamber, gases go out another chamber. This design keeps contaminates
and gases from entering the watering hoses. (See “water
trap”.)
Large degas opening – Gases can
easily leave the cell, while air can easily flow in. The
LARGE degas port opening is located on the side to keep
dirt and dust particles from clogging the vent.
Water trap – Each plug is equipped
with a water trap to prevent hydrogen from entering the
system or other cells. Should one cell ever develop an arc,
no other cells would be damaged.
|
